Technical Specification:
| Display | Screen Type: High-resolution display Screen Size: 7 inch (17.7cm) diagonally Sweep Speed: 25mm/sec Information: Heart Rate, Lead/Pads, Alarm on/off, Sop2, AED Functions and Prompts, Alarm Selection and Limits, Delivered Energy. |
| Defibrillator | Waveform: Biphasic Energy Display: Monitor dispaly indicates both selected and delivered energy Charge Prompt Type: Voice and visual prompts. Electrode Impedance Measurement Range: 0-250 ohms. |
| ECG Monitoring | Patient Connection: 3-lead ECG cable, or 5-lead cable, paddles. Lead Selection: Display on monitor, paddles, I, II, III, AVR, AVL, AVF, V, ECG Size: 0.25, 0.5, 1, 1.5, 2, 4cm/mV display on monitor Heart Rate: 20-300 BPM Heart Rate Alarm, On/Off displayed on monitor, user-selectable. Smart Alarms: Beeper/Voice prompts indicate shock able rhythm. |
| Battery | Type: Rechargeable, Ni-MH Battery, 12V. Operating Time: For a new, fully charged battery, 60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions. |
| SPO2 Module | Measurement Range: 30~100%, ±2% between 80%~90%, others ±5% Alarm Range: User set high limit and low limit. Alarm Accuracy: ±10% within setting values. Alarm time Accuracy: less than 12 sec. |
| AED Mode | AED Function: Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts. Shockable Rhythms: Ventricular fibrillation Ventricular tachycardia QRS complex wave duration Charge Control: Control on device front panel, press key on paddle. |
| Manual Mode | Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules. Synchronized Mode: Synchronizes defibrillator pulse to patient's R-wave. "SYNC" message displayed on monitor. |
Navigation
Get in Touch
