Home  >  Products  >  Hemodialysis System
CNME-250 Water treatment for hemodialysis
  • CNME-250 Water treatment for hemodialysis
  • CNME-250 Water treatment for hemodialysis
  • CNME-250 Water treatment for hemodialysis
CNME-250 Water treatment for hemodialysis CNME-250 Water treatment for hemodialysis CNME-250 Water treatment for hemodialysis

CNME-250 Water treatment for hemodialysis

Product name :hemodialysis water production equipment

Product model: CNME-250

Equipment water rate of  250 L/H (25 ℃)

Produced water quality conforms to the AAMI/ASAIO dialysis water standards (2006 edition) and YY0572-2015 standard of dialysis water Conductivity < 5 u s.c m

Ion removal rate 99.5% or higher

Bacterial virus removal rate 99.8% or higher

Two-stage reverse osmosis system technology, secondary direct coupling, the secondary water production for straight

Automatic chemical disinfection disinfection way, automatic washing detergent

Film processing timing film flushing (can be set boot, shutdown flushing)

Operating pressure, 0.8 to 1.2 Mpa, the highest operating pressure 1.55 Mpa

System recovery 60-75%

The system total power constant power: 4 KW plus or minus 10%

Control mode PLC + LCD touch screen control, can be automatic or manual operation

Working environment temperature 5 to 40 ℃, relative humidity 80% or less

Work five wire power 380 v + 10% for three-phase frequency: 50 to 60 hz

Water for urban tap water, water flow or 1 t/H, acuity 0.15 Mpa water pressure

Covers an area of demands room area, 15 ㎡ or a floor drain and waterproof layer



Product Name: CNME-250 Water treatment for hemodialysis
*
Contact Person:
*
Tel:
*
Company Name:
Fax:
*
E-mail:
*
Country:
*
Your Inquiry:
*
CAPTCHA:

chat online