Medical Device Air Mode Newborn Intensive Care Infant Incubator

Model: CNME010709

Brief Introduction:
Air mode control, Set temperature and Air temperature are displayed separately;
Passive humidification;
Inclination of bassinet is adjustable;
Multiple failure alarm indications;
RS -232 connector for data output;
Oxygen input interface, Oxygen supply system;
Low noise DC motor.

Standard Configuration:
Hood, Base, Controller, I.V pole, Tray.

Optional Configuration:
"> 37°C" temperature override mode function, Vertical height adjustment stand (VHA stand), Weighing system

Environmental temperature:
Operating range: 20°C- 30°C(Set temperature should be 3°C higher than the environment temperature)
Ambient air velocity: <0.3m/s

Specification:

Product name	Medical Device Air Mode Newborn Intensive Care Infant Incubator
Power requirement	AC220V-230V/50Hz or AC110-120V/50-60Hz, 850VA
Control Mode	Air mode control
Air temperature control range	25°C-37°C(Override mode: 37°C-39°C is optional)
The temperature fluctuation range between incubator temperature and average incubator temperature (Under stable temperature condition)	≤0.5°C
Temperature Uniformity	≤0.8°C(mattress is on the horizontal position)
Inclination of the bassinet	±12°
Noise inside hood	≤45dB(A)
Failure alarm	over temperature alarm, deviation alarm, sensor failure alarm, fan motor alarm, power failure alarm, system alarm and so on.
The average value of total irradiance for bilirubin Ebi max of phototherapy equipment	≥640 μ W/cm2 ≥1300 μ W/cm2
Built-in timer range	0~9999 hrs 59min
Accuracy of weight display	±1% (equipped with weighing system)